Some words on Fickle Skateboards and the “Maker” skateboard community

A couple of years ago Lew Ross and his company Fickle Skateboards came across my radar. I think it was David Thornton’s old LuchaSkate podcast interview with Lew that got my attention. About that time there was a new group of skateboarding bloggers coming to prominence. Kyle Duvall of the Parking Block Diaries, David, and a few others were really making their mark. David would later transfer LuchaSkate to the control of Brian Czarski, who would change it to NeverWas Skateboarding. But David’s energy from both the LuchaSkate blog/podcast and the associated Facebook page helped bring some good people to my attention.

In mid-2017 I got wind that Lew was going to be in Austin, visiting and skating with Indiana refugee Jason Renn, Bryce Miller, and some other local Austin skaters. I contacted Jason and made arrangements to go down and skate and meet these guys. When I got to Renn’s place, Lew had a number of boards available for purchase. I bought his “Classic” shape, the review of which can be found here.

Since that time I had another chance to skate with Lew, Jason, and the crew at StupidFest 1, in October 2018. At the time I was riding his Knucklehead shape. As one of the admins of Neverwas Skateboarding, Lew brought me an 8.25″ version of his Bullnose shape, which I just set up and have not had a chance to skate yet as it has been winter.

But I want to show a few pictures of these setups, and say a few more words about Lew’s workmanship.

The Knucklehead (the board on the right)I have is now well-ridden. I find it to be a bit wider than the specs on the Fickle website. The board seems to be about 9″ over the trucks. I think Lew makes adjustments to this boards as time goes by?

At any rate, it’s a bit wider than I expected. I set mine up with Indy 169s, which fit it perfectly. I’ve been using 54mm Spitfires on it, and 1/4″ risers. It’s a big setup. When I rode it in some ditches in Austin I put some 56mm 87a OJ Keyframes on it and it performed really well. I normally like a slightly smaller street board that I can use 149s on, but this board is really nice feels great. It has the same great and comfortable concave as the Classic, the same nice easy curves in the nose and tail kick angles. In other words – great mold. I love it. I think Lew makes the most comfortable concaves I’ve felt in a long time.

You can see I’ve worn the tail down on one side from doing 360s and scraping the tail. So it goes. Story of my life. That’s why I’ve got a tail skid on the Mode Pool board I’ve been skating ditches on the last couple of months.

The other board is the Fickle Bullnose. It’s a pops shape with very full nose and tail. You can see the specs here. I’ve got it set up with Ace 44s and those same OJ Keyframes I mentioned earlier. Wheels may change, depending on how I decide to use it. As you can see from some of the other pics, it has the same very nice concave and mold angles as all Lew’s boards. Look at the curves of the tail – nice and ….errrr…curvy…rather than an abrupt angle. I’m looking forward to trying the Bullnose out.

Lew has his own philosophy about finishing. Actually, Lew has his own philosophy about everything, but that’s another story (a positive one). He doesn’t over-sand his boards. From what I gather, he thinks it weakens them. They aren’t rough, just not “slick”. Likewise, he doesn’t put a lot of paint or sealer on them. The graphics are distinctive, and the boards seem to have a light coat of spray sealer. I wouldn’t call them “rustic”. The finish is fine. It’s just different from what most of us are used to.

I’ll be honest. When I got the Knucklehead I thought it was too big for me. I’m a fairly large person, but it is just a lot more beefy than I normally ride. But it looked really cool, and really, it feels great. The dimensions work really well with the concave and a proper setup. It feels good, and really performed very well in Austin’s ditches, as well as in my normal skate spots. A lot of the clips in my part in NeverWas II were shot while I was riding the Knucklehead in a ditch and on flat. The others were on my Mode 8.25″ pops or my Mode freestyle board.

 

 

 

 

 

So there you have it, my review of Fickle.

 

2 thoughts on “Some words on Fickle Skateboards and the “Maker” skateboard community

  1. Lew

    Thanks for this write up!!!!
    FYI: I actually put over four coats of sealer on them. I just don’t use the shiny stuff. A satin finish in contrast to the gloss mainstream. Philosophical choice!
    The slightly rougher finish is due to satin coatings and less sanding. I am a blowhard about board strength. That said, I just started using some thinner veneers. We will see how it goes.

    Reply
  2. Eric Sanders

    Good read and review Bob. I agree that Lew has the best feeling concave in the universe. No sharp kink angels just smooth as well smooth.

    Reply

Leave a Reply to Lew Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.